Oct 042011
 

Wicked Lasers krypton review – Completely unbiased!

Unlike most the reviews found when doing a Google search, I will be doing an unbiased review of Wicked Lasers and the krypton Laser as well as their customer service.

You must understand that the Tech/Geek mags and sites as well as the Moderator at the LPF have been getting hand fed lasers so their reviews are perfect. Well they don’t know who I am by the name I used to make my order…. but they will now!

The Order Process:
The first laser I ordered was a mistake (300mw) but my credit card declined payment, so I sent a message to WL to cancel that order just in case. No email received about any order so no order number

A few days later I ordered again. This time I made sure to select the laser (1000mw) and the lens kit.
That order was declined by my credit card also, so I jumped a few hoops, re-ordered again and this time it went through without any problems.

The Delivery:
Roughly 2 weeks have passed when UPS delivers a plastic envelope, about 10′ from my front door. Lucky I saw it while leaving for work.

The Package:

So I open this plastic envelope which contains 2 paper envelopes wrapped with bubble wrap.
Inside these paper envelopes there are 2 lasers!

(1) 300mw & (1) 1000mw or at least that’s what is marked on a sticker attached to each laser.

Yes there’s more!

The Lasers:
Both are missing the tail-caps, batteries, chargers, lens kit, safety glasses, instructions and boxes!

Without the tail-caps and batteries, I will have to use parts from one of my Arctic’s to see if these even work.

I was able to install the Arctic’s tail-cap on the 1000mw krypton and kept pushing the power button until the laser came on “Remember I don’t have the instructions in order to know how to use the Smart Switch II”.

The Laser is very very very bright, and without safety glasses I am forced to turn it off due to the reflections off the white walls in the house being to extreme to my eyes.
I proceed outside…

This thing is a fricking MONSTER! I’m impressed by its power.

Now I attempt to use the same tail-cap on the 300mw krypton, However it will not screw on more than a few turns tops. Another bad mark for Wicked Lasers!

Conclusion:
The first laser I ordered was a mistake (300mw) but my credit card declined payment, so I sent a message to Wicked Lasers to cancel that order just in case. A few days later I ordered the second laser (1000mw) and the lens kit.

That order was declined by my credit card also, so I jumped a few hoops, re-ordered again and this time it was oked by my CC company.

This tells me that after several failed orders and a message to Wicked Lasers, They went ahead and used my credit card to charge me for the prior failed orders without my permission or knowledge… Another bad mark!

While I like 1 of the 2 lasers I received, The price was a bit high, The service was below “Sucks Ass”.
So before you order, you might want to think twice.

Whats Next?:
I will be contacting Wicked Lasers to see what they plan on doing to straighten this mess out and update this post with that information…

Stay Tuned!…

I will be making updates to this post as more information becomes available.

Read more: Wicked Lasers krypton review – Completely unbiased! http://www.laserholics.com/showthread.php?5413-Wicked-Lasers-Kryton-review-Completely-unbiased!#ixzz1ZqeAGLFE
www.LaserHolics.com
Under Creative Commons License: Attribution Non-Commercial No Derivatives

Mar 062011
 

After purchasing a XBOX 360, I soon realized that all those years playing Doom and Quake on the PC had limited my ability to use controllers that come standard with the current Game Consoles. So the search started for a mouse like controller.

My first purchase was the AIMON XB, It was half mouse for the right hand and half controller/numb-chuck for the left hand. This idea was perfect for us older gamers who are use to a mouse.
Soon after purchasing it, I found it had flaws and I mean some major flaws.

1) Build Quality
2) Software issues
3) Interference

1) Build Quality:
After a short time of using this controller, The mouse side just died! So I dissembled it to find a wire pinched during assembly that finally gave way after a short time of using it. Not to be deterred and forced to look like a retard while playing games on-line, I disassembled the mouse and repaired the broken wire.
Now that got it working, however there was still issues with this device.

2) Software issues:
Even after a few updates, the controller would continue to be choppy and hard to control. You could make all the adjustment you wanted, and nothing would help. It was going to be too slow to respond or to choppy to control…

3) Interference:
Then there was the signal interference problem. This would cause you do do all sorts of unwanted moves and/or just loose total control.

Not real impressive is it? especially when your in the heat of battle and it causes you to get fragged time after time after time…..

So still not being able to grasp the use of the original controller, I dropped another $100.00 including shipping for another AIMON XB from EXCHEAP. After about a week I had to contact them to get a tracking number for my order that I paid extra for 3 day shipping UPS! They told me that it was overlooked and it would ship out the next day. Holy crap, That was STRIKE ONE.

After finally receiving my order I quickly realized that it wasn’t what they show, advertise and not what I paid for, It was a XSCORCH! so I shot them an email asking for the correct item. Get this, They reply asking me what an XSCORCH was!!!!! and what it looked like!!! STRIKE TWO.

So I sent them a picture of both controllers, using one of them from their very own website. I have yet to hear back from them, so I filed a PayPal Claim…

So rather than wait for the incompetent asses to correct their error or refund me, I decided to try this older version of what I actually ordered and Play my favorite games, Call of Duty and BulletStorm.

Now at first this controller worked better than the newer version AIMON XB, but within a week the numb-Chuck side would just quit working by turning itself off in the middle of battle… STRIKE THREE!

So in short, STAY AWAY FROM BOTH OF THESE CONTROLLERS and the China Store that sell them. NOT worth the money, headaches and gray hair!

dp seal trans 16x16 XSCORCH & AIMON XB controller for the XBOX reviewCopyright secured by Digiprove © 2011 WagnerTech LLC

Aug 202010
 

“WW II Posters Found”
I know some of you are too young to recall these posters and WWII, but they were a part of some of our lives and others who are now in an older generation. They still  have great words and messages that ring true today. Pass them along to friends, both young and old. I  wonder whatever happened to this kind of  thinking.
I got a lump in my throat when I read  this. I “grew up” thinking: patriotism,  it is the AMERICAN  way!  I am glad to see that somebody saved them. The statement at the end says it all!


~  These were our parents  ~

What in God’s name have we let happen?

I guess we are the last generation to see, or even remember anything like these!

Whatever happened?

It’s called………………………….

Political  correctness (or “re-education”) happened,

Lack of God’s name happened,

Lack of personal responsibility happened,

Lack of personal integrity and honesty happened,

Lack of respect and loyalty to our country happened,

Lack of  being an American happened.

Did  all of these things die along with common  sense ?!?~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

I for one am still proud to be an American! If  you are too….. pass this along, so others can show their pride ……….in English please!

“The two enemies of the people are criminals and government. So let us tie the second down with the chains of the Constitution so that the second will not become the legal version of the first.” – Thomas Jefferson

Aug 172010
 
scales_of_justice

The Bloggers’ FAQ on Online Defamation Law provides an overview of defamation (libel) law, including a discussion of the constitutional and statutory privileges that may protect you.

What is defamation?

Generally, defamation is a false and unprivileged statement of fact that is harmful to someone’s reputation, and published “with fault,” meaning as a result of negligence or malice. State laws often define defamation in specific ways. Libel is a written defamation; slander is a spoken defamation.

What are the elements of a defamation claim?

The elements that must be proved to establish defamation are:

  1. a publication to one other than the person defamed;
  2. a false statement of fact;
  3. that is understood as
    • a. being of and concerning the plaintiff; and
    • b. tending to harm the reputation of plaintiff.
  4. If the plaintiff is a public figure, he or she must also prove actual malice.

Is truth a defense to defamation claims?

Yes. Truth is an absolute defense to a defamation claim. But keep in mind that the truth may be difficult and expensive to prove.

Can my opinion be defamatory?

No—but merely labeling a statement as your “opinion” does not make it so. Courts look at whether a reasonable reader or listener could understand the statement as asserting a statement of verifiable fact. (A verifiable fact is one capable of being proven true or false.) This is determined in light of the context of the statement. A few courts have said that statements made in the context of an Internet bulletin board or chat room are highly likely to be opinions or hyperbole, but they do look at the remark in context to see if it’s likely to be seen as a true, even if controversial, opinion (“I really hate George Lucas’ new movie”) rather than an assertion of fact dressed up as an opinion (“It’s my opinion that Trinity is the hacker who broke into the IRS database”).

What is a statement of verifiable fact?

A statement of verifiable fact is a statement that conveys a provably false factual assertion, such as someone has committed murder or has cheated on his spouse. To illustrate this point, consider the following excerpt from a court (Vogel v. Felice) considering the alleged defamatory statement that plaintiffs were the top-ranking ‘Dumb Asses’ on defendant’s list of “Top Ten Dumb Asses”:A statement that the plaintiff is a “Dumb Ass,” even first among “Dumb Asses,” communicates no factual proposition susceptible of proof or refutation. It is true that “dumb” by itself can convey the relatively concrete meaning “lacking in intelligence.” Even so, depending on context, it may convey a lack less of objectively assayable mental function than of such imponderable and debatable virtues as judgment or wisdom. Here defendant did not use “dumb” in isolation, but as part of the idiomatic phrase, “dumb ass.” When applied to a whole human being, the term “ass” is a general expression of contempt essentially devoid of factual content. Adding the word “dumb” merely converts “contemptible person” to “contemptible fool.” Plaintiffs were justifiably insulted by this epithet, but they failed entirely to show how it could be found to convey a provable factual proposition. … If the meaning conveyed cannot by its nature be proved false, it cannot support a libel claim.

This California case also rejected a claim that the defendant linked the plaintiffs’ names to certain web addresses with objectionable addresses (i.e. www.satan.com), noting “merely linking a plaintiff’s name to the word “satan” conveys nothing more than the author’s opinion that there is something devilish or evil about the plaintiff.”

Is there a difference between reporting on public and private figures?

Yes. A private figure claiming defamation—your neighbor, your roommate, the guy who walks his dog by your favorite coffee shop—only has to prove you acted negligently, which is to say that a “reasonable person” would not have published the defamatory statement.A public figure must show “actual malice”—that you published with either knowledge of falsity or in reckless disregard for the truth. This is a difficult standard for a plaintiff to meet.

Who is a public figure?

A public figure is someone who has actively sought, in a given matter of public interest, to influence the resolution of the matter. In addition to the obvious public figures—a government employee, a senator, a presidential candidate—someone may be a limited-purpose public figure. A limited-purpose public figure is one who (a) voluntarily participates in a discussion about a public controversy, and (b) has access to the media to get his or her own view across. One can also be an involuntary limited-purpose public figure—for example, an air traffic controller on duty at time of fatal crash was held to be an involuntary, limited-purpose public figure, due to his role in a major public occurrence.Examples of public figures:

  • A former city attorney and an attorney for a corporation organized to recall members of city counsel
  • A psychologist who conducted “nude marathon” group therapy
  • A land developer seeking public approval for housing near a toxic chemical plant
  • Members of an activist group who spoke with reporters at public events

Corporations are not always public figures. They are judged by the same standards as individuals.

What are the rules about reporting on a public proceeding?

In some states, there are legal privileges protecting fair comments about public proceedings. For example, in California you have a right to make “a fair and true report in, or a communication to, a public journal, of (A) a judicial, (B) legislative, or (C) other public official proceeding, or (D) of anything said in the course thereof, or (E) of a verified charge or complaint made by any person to a public official, upon which complaint a warrant has been issued.” This provision has been applied to posting on an online message board, Colt v. Freedom Communications, Inc., and would likely also be applied to blogs. The California privilege also extends to fair and true reports of public meetings, if the publication of the matter complained of was for the public benefit.

What is a “fair and true report”?

A report is “fair and true” if it captures the substance, gist, or sting of the proceeding. The report need not track verbatim the underlying proceeding, but should not deviate so far as to produce a different effect on the reader.

What if I want to report on a public controversy?

Many jurisdictions recognize a “neutral reportage” privilege, which protects “accurate and disinterested reporting” about potentially libelous accusations arising in public controversies. As one court put it, “The public interest in being fully informed about controversies that often rage around sensitive issues demands that the press be afforded the freedom to report such charges without assuming responsibility for them.”

If I write something defamatory, will a retraction help?

Some jurisdictions have retraction statutes that provide protection from defamation lawsuits if the publisher retracts the allegedly defamatory statement. For example, in California, a plaintiff who fails to demand a retraction of a statement made in a newspaper or radio or television broadcast, or who demands and receives a retraction, is limited to getting “special damages”—the specific monetary losses caused by the libelous speech. While few courts have addressed retraction statutes with regard to online publications, a Georgia court denied punitive damages based on the plaintiff’s failure to request a retraction for something posted on an Internet bulletin board. (See Mathis v. Cannon)If you get a reasonable retraction request, it may help you to comply. The retraction must be “substantially as conspicuous” as the original alleged defamation.

What if I change the person’s name?

To state a defamation claim, the person claiming defamation need not be mentioned by name—the plaintiff only needs to be reasonably identifiable. So if you defame the “government executive who makes his home at 1600 Pennsylvania Avenue,” it is still reasonably identifiable as the president.

Do blogs have the same constitutional protections as mainstream media?

Yes. The US Supreme Court has said that “in the context of defamation law, the rights of the institutional media are no greater and no less than those enjoyed by other individuals and organizations engaged in the same activities.”

What if I republish another person’s statement? (i.e. someone comments on your posts)

Generally, anyone who repeats someone else’s statements is just as responsible for their defamatory content as the original speaker—if they knew, or had reason to know, of the defamation. Recognizing the difficulty this would pose in the online world, Congress enacted Section 230 of the Communications Decency Act, which provides a strong protection against liability for Internet “intermediaries” who provide or republish speech by others. See the Section 230 FAQ for more.The vast weight of authority has held that Section 230 precludes liability for an intermediary’s distribution of defamation. While one California court had held that the federal law does not apply to an online distributor’s liability in a defamation case, the case, Barrett v. Rosenthal, was overturned by the California Supreme Court (EFF filed an amicus brief in this case)

Can I get insurance to cover defamation claims?

Yes. Many insurance companies are now offering media liability insurance policies designed to cover online libel claims. However, the costs could be steep for small blogs—The minimum annual premium is generally $2,500 for a $1 million limit, with a minimum deductible of $5,000. In addition, the insurer will conduct a review of the publisher, and may insist upon certain standards and qualifications (i.e. procedures to screen inflammatory/offensive content, procedures to “take down” content after complaint). The Online Journalism Review has an extensive guide to libel insurance for online publishers.

Will my homeowner’s or renter’s insurance policy cover libel lawsuits?

Maybe. Eugene Volokh’s the Volokh Conspiracy notes that homeowner’s insurance policies, and possibly also some renter’s or umbrella insurance policies, generally cover libel lawsuits, though they usually exclude punitive damages and liability related to “business pursuits.” (This would generally exclude blogs with any advertising). You should read your insurance policy carefully to see what coverage it may provide.

What’s the statute of limitation on libel?

Most states have a statute of limitations on libel claims, after which point the plaintiff cannot sue over the statement. For example, in California, the one-year statute of limitations starts when the statement is first published to the public. In certain circumstances, such as when the defendant cannot be identified, a plaintiff can have more time to file a claim. Most courts have rejected claims that publishing online amounts to “continuous” publication, and start the statute of limitations ticking when the claimed defamation was first published.

What are some examples of libelous and non-libelous statements?

The following are a couple of examples from California cases; note the law may vary from state to state. Libelous (when false):

  • Charging someone with being a communist (in 1959)
  • Calling an attorney a “crook”
  • Describing a woman as a call girl
  • Accusing a minister of unethical conduct
  • Accusing a father of violating the confidence of son

Not-libelous:

  • Calling a political foe a “thief” and “liar” in chance encounter (because hyperbole in context)
  • Calling a TV show participant a “local loser,” “chicken butt” and “big skank”
  • Calling someone a “bitch” or a “son of a bitch”
  • Changing product code name from “Carl Sagan” to “Butt Head Astronomer”

Since libel is considered in context, do not take these examples to be a hard and fast rule about particular phrases. Generally, the non-libelous examples are hyperbole or opinion, while the libelous statements are stating a defamatory fact.

How do courts look at the context of a statement?

For a blog, a court would likely start with the general tenor, setting, and format of the blog, as well as the context of the links through which the user accessed the particular entry. Next the court would look at the specific context and content of the blog entry, analyzing the extent of figurative or hyperbolic language used and the reasonable expectations of the blog’s audience.Context is critical. For example, it was not libel for ESPN to caption a photo “Evel Knievel proves you’re never too old to be a pimp,” since it was (in context) “not intended as a criminal accusation, nor was it reasonably susceptible to such a literal interpretation. Ironically, it was most likely intended as a compliment.” However, it would be defamatory to falsely assert “our dad’s a pimp” or to accuse your dad of “dabbling in the pimptorial arts.” (Real case, but the defendant sons succeeded in a truth defense).

What is “Libel Per Se”?

When libel is clear on its face, without the need for any explanatory matter, it is called libel per se. The following are often found to be libelous per se:A statement that falsely:

  • Charges any person with crime, or with having been indicted, convicted, or punished for crime;
  • Imputes in him the present existence of an infectious, contagious, or loathsome disease;
  • Tends directly to injure him in respect to his office, profession, trade or business, either by imputing to him general disqualification in those respects that the office or other occupation peculiarly requires, or by imputing something with reference to his office, profession, trade, or business that has a natural tendency to lessen its profits;
  • Imputes to him impotence or a want of chastity.

Of course, context can still matter. If you respond to a post you don’t like by beginning “Jane, you ignorant slut,” it may imply a want of chastity on Jane’s part. But you have a good chance of convincing a court this was mere hyperbole and pop cultural reference, not a false statement of fact.

What is a “false light” claim?

Some states allow people to sue for damages that arise when others place them in a false light. Information presented in a “false light” is portrayed as factual, but creates a false impression about the plaintiff (i.e., a photograph of plaintiffs in an article about sexual abuse, because it creates the impression that the depicted persons are victims of sexual abuse). False light claims are subject to the constitutional protections discussed above.

What is trade libel?

Trade libel is defamation against the goods or services of a company or business. For example, saying that you found a severed finger in you’re a particular company’s chili (if it isn’t true).
Go to their site:    head logo Online Defamation Law

Aug 102010
 
WL Arctic 017
Here’s a few pics of Wicked Lasers Arctic G1 wink Wicked Lasers Spyder III Pro Arctic Series PICS!
and just so you know… None of these photos where touched in ANY way.

 Wicked Lasers Spyder III Pro Arctic Series PICS!

As you can see our Laser Tripod has No problem holding this monster.

 Wicked Lasers Spyder III Pro Arctic Series PICS!

The next 2 pictures where taken in indirect sunlight
High Noon and you can still see the beam.

 Wicked Lasers Spyder III Pro Arctic Series PICS!

 Wicked Lasers Spyder III Pro Arctic Series PICS!

 Wicked Lasers Spyder III Pro Arctic Series PICS!

 Wicked Lasers Spyder III Pro Arctic Series PICS!

 Wicked Lasers Spyder III Pro Arctic Series PICS!

No its not dark, just moved downstairs for some revealing Beam Goodness.

 Wicked Lasers Spyder III Pro Arctic Series PICS!

Now ain’t that pretty!

 Wicked Lasers Spyder III Pro Arctic Series PICS!

dp seal trans 16x16 Wicked Lasers Spyder III Pro Arctic Series PICS!Copyright secured by Digiprove © 2010 WagnerTech LLC

Aug 012010
 

There are MANY unscrupulous business’s that will tell you anything to get your money. Here in the USA you have rights, take your business overseas and you risk loosing it all with no recourse.

Here an example of such a business.  They advertise a 3000mw or 3W green laser for under $300.00! There’s your first red flag.

See their web site advertisement below.

fuzhaoxiong Buying a Laser? Watch out for those China Rip Offs!

fuzhaoxiong

After finding this site, I contacted them using their LIVE CHAT. See copy below.

For both parties (sellers and buyers), please do not leave any personal contact information.
You haven’t signed up yet. Join free to get more services
fuzhaoxiong icon sad Buying a Laser? Watch out for those China Rip Offs! 2010-07-22 22:13:36)
hi
You icon sad Buying a Laser? Watch out for those China Rip Offs! 2010-07-22 22:13:55)
Are these tested to verify 3W output?
fuzhaoxiong icon sad Buying a Laser? Watch out for those China Rip Offs! 2010-07-22 22:15:34)
yes
You icon sad Buying a Laser? Watch out for those China Rip Offs! 2010-07-22 22:16:16)
Is the focus adjustable?
fuzhaoxiong icon sad Buying a Laser? Watch out for those China Rip Offs! 2010-07-22 22:17:01)
Of course It can be adjusted
You icon sad Buying a Laser? Watch out for those China Rip Offs! 2010-07-22 22:17:15)
OK Thank You
fuzhaoxiong icon sad Buying a Laser? Watch out for those China Rip Offs! 2010-07-22 22:18:22)
What else can help you
You icon sad Buying a Laser? Watch out for those China Rip Offs! 2010-07-22 22:18:57)
I’m in USA, dont want customs taking it, how do you sipt it/
You icon sad Buying a Laser? Watch out for those China Rip Offs! 2010-07-22 22:19:01)
Ship
fuzhaoxiong icon sad Buying a Laser? Watch out for those China Rip Offs! 2010-07-22 22:19:25)
friend,don’t worry about it
fuzhaoxiong icon sad Buying a Laser? Watch out for those China Rip Offs! 2010-07-22 22:20:07)
we shiped to as a gift
You icon sad Buying a Laser? Watch out for those China Rip Offs! 2010-07-22 22:21:12)
ido worry about it, I sell Lasers. I own http://www.LaserSurplusParts.com. I know about shipping problems. How do you declare the laser?
You icon sad Buying a Laser? Watch out for those China Rip Offs! 2010-07-22 22:21:31)
Ahh, Good to hear.
You icon sad Buying a Laser? Watch out for those China Rip Offs! 2010-07-22 22:22:16)
This laser will be reviewed at my forum http://www.LaserEnthusiast.com. If it tests good, you will get MANY buyers ;o)
fuzhaoxiong icon sad Buying a Laser? Watch out for those China Rip Offs! 2010-07-22 22:24:03)
We will test before shipping the goods
fuzhaoxiong icon sad Buying a Laser? Watch out for those China Rip Offs! 2010-07-22 22:25:16)
So
fuzhaoxiong icon sad Buying a Laser? Watch out for those China Rip Offs! 2010-07-22 22:26:14)
Our products are high quality .So don’t worry
You icon sad Buying a Laser? Watch out for those China Rip Offs! 2010-07-22 22:26:39)
Thank You, Order made
fuzhaoxiong icon sad Buying a Laser? Watch out for those China Rip Offs! 2010-07-22 22:26:54)

As you can see, They clearly state that the laser has been tested and is in fact a 3w laser.

So I went ahead and ordered the laser the the intent of doing a review.

After receiving the laser in a acceptable  amount of time, I popped a fresh 18350 battery into it, turned the key switch and hit the power button. and …. and …. was very disappointed at what I saw!

I have dozens upon dozens of lasers and equipment to test them, So I confirmed my suspicions of its output by testing it with a Laser Power Meter or LPM.  The power was less than 100mw!

Now I can see them making a mistake “Yea Right” on their website by adding an extra “0″ to the lasers power description, but this laser failed to even reach 300mw!

So now comes the fun part… I filed a claim with DHgate where the manufacturer sells from, and began the lengthy ordeal to get a refund.

After filing the claim, the seller responded that their supplier lied to them about the output of the laser, I then proceeded to post a copy of our Live Chat where they claim to have verified the lasers actual output as 3000mw.

Since then they have not said a word! imagine that! So we shall see when I escalate the claim to DHgate if anything gets done.

I also informed them that since they now know that these lasers are NOT 3000mw, they should change or pull the ad. But so far they have not! HHmmmm…

I hope by reading this you have learned something, If it seems to good to be true… it probably is a SCAM!

Company Name; ZHOMG RIHE

After reading a few reviews I found that they sold a 4000mw laser to a customer that also failed to make the grade in the power department.

More to come…

12 visitors online now
2 guests, 10 bots, 0 members
Max visitors today: 22 at 01:33 am CDT
This month: 23 at 05-17-2012 10:57 am CDT
This year: 49 at 02-03-2012 08:01 am CST
All time: 67 at 08-15-2010 03:30 pm CDT

Bad Behavior has blocked 121 access attempts in the last 7 days.


Diy-Lasers.com
The best collection of Laser Parts & Accessories at the Lowest prices! USA